Key Responsibilities/主要職責: - Responsible for formulating the assembly and production process of automotive electronic power products, such as assembly, locking, testing, etc. 負責汽車電子產品組裝生產的工藝制訂，如裝配、鎖付、測試等。 - Responsible for analyzing product production issues and developing relevant process standards, such as Layout, SOP, PFMEA, Flow chart, etc. 負責分析產品生產問題，制定相關工藝標準，如Layout、SOP、PFMEA、Flow chart等。 - Responsible for process plan design, including equipment selection, process planning, and related tooling design. 負責工藝方案設計，包括設備選型，工藝流程制訂，相關工裝設計等。 - Responsible for process plan design, including equipment selection, process planning, and related tooling design. 負責工藝方案設計，包括設備選型，工藝流程制訂，相關工裝設計等。 - Responsible for analyzing the failure of defective products and tracking improvement measures until they are implemented and resolved. 負責不良品失效分析，并追蹤改善措施直到落地解決。 - Participate in reviewing the design of power level layouts, be responsible for the introduction of new products for power level products, and follow up on the production status of all process segments. 參與評審layout的設計，負責新品導入，跟進所有制程段生產狀況。 - Responsible for improving efficiency and quality during mass production, and continuously optimizing related processes.負責量產過程中的效率提升與品質改善，并對相關制程不斷進行優化。 - Responsible for analyzing and resolving quality issues with products in the market. 負責分析和解決產品在市場出現的品質問題。 - Responsible for equipment management and fault repair to ensure the equipment is in good condition and meets the requirements of process research and development work, as well as the preparation of related spare parts, and to improve equipment utilization rate, etc. 負責設備管理及故障維修，確保設備性能完好，滿足工藝研發工作，以及相關備件的準備工作，并能提升設備稼動率等； Qualifications and Competencies/任職資格及能力: - Proficient in the assembly and production process of power level products, able to proficiently complete the process design of related products and formulate process documents. 精通汽車電子產品的組裝生產工藝，能夠熟練的完成相關產品的工藝設計及工藝文件的制訂。 - Familiar with equipment selection for electronics products, able to design the tooling, fixtures, gauges, fixtures, and measuring tools used to a certain extent, and have a certain understanding of non-standard automation. 熟悉汽車電子產品的設備選型，能夠對所使用的工裝、夾、檢、治、測具進行一定程度上的設計，并對非標自動化有一定的理解。 - Familiar with the IATF16969 system and proficient in using the five major tools.熟悉IATF16969體系、能夠熟練運用五大工具。 - Proficient in using basic office software and drawing software, proficient in preparing process documents, and possessing statistical analysis skills. 熟練使用基本辦公軟件以及制圖軟件，熟練編制工藝文件，具備統計分析能力。 - Analytical, solution-oriented, independent and structured way of working; high degree of communication skills, assertiveness and ability to work in a team. 善于分析和解決問題，能獨立、有條理的工作，良好的溝通技巧和團隊合作能力。 - Remain accountable when mistake happens and be able to speak up if something goes wrong. 問題發生時能積極負責，并及時反饋。 - Proficient in the commissioning, troubleshooting and maintenance of non-standard automated equipment such as tightening, air tightness testing, heat dissipation and sealant application. 熟練掌握擰緊、氣密測試、散熱及密封膠涂布等非標自動化設備的調試、異常處理及維護保養技能； Education/教育要求: - Bachelor degree or above (or equivalent in a related field), majoring in electrical, electronic, automation, or related fields. 本科及以上學歷(或相關專業同等學歷) ，電氣、電子、自動化等相關專業。 Experience/經驗要求: - More than 5 years of working experience in the automotive electronics and 2-3 years of process & equipment experience in electronics products. 74 要求具有5年以上的汽車電子行業工作經驗，2~3年汽車電子產品的制程及設備經驗。 74 Fluent English in both writing and oral as main working language besides mandarin. 需要具備流利的英語（口語和書面）技能作為除普通話之外的主要工作語言。