生產質量工程師Production Quality
Engineer(太倉)
蘇州-太倉
您的主要職責
- Ensure the QM-System in
the production:
-Maintenance of the quality system in the assigned area
(together with production principals) according to Schaeffler quality policy
and system
-Audit support and preparation. e.g. Internal or external
audit based on VDA or IATF16949.
-Carrying out process, product, work place audits in the
production areas
?確保生產中的質量管理系統:
-根據舍弗勒的質量政策和體系,在指定區域(與生產負責人一起)維護質量體系
-審計支持和準備。例如,基于VDA或IATF16949的內部或外部審計。
-在生產區域進行流程、產品、工作場所審核
- Quality control in
production:
-Monitor quality status and quality key measures (scrap
cost, complaints internal/external, Q-inventory, special approvals) , take
activities if with deviations.
-Handle customer complaints from both internal and
external sources, coordinate root cause analysis and corrective actions, and
promptly submit analysis reports.
-Non-confirming parts management, in the case of products
suspected of being faulty, ensure that these are identified, contained, and
blocked for further use.
-Change management, validation in the case of new or
changed product & process.
-Drive continuous improvement in terms of process flow,
inspection method, Poka yoke and process capability.
-Organize fast response team to react to daily quality
problem in the supported area, ensure the effectiveness & efficiency of
problem solving.
-Perform statistical analysis of quality data and take
actions to improve product quality.
-Prepare and
control quality related instruction/standards in the shop floor, provide the
necessary training.
生產中的質量控制:
-監控質量狀態和質量關鍵措施(報廢成本、內部/外部投訴、質量庫存、特殊批準),如果有偏差,采取行動。
-處理來自內部和外部的客戶投訴,協調根本原因分析和糾正措施,并及時提交分析報告。
-非確認零件管理,在懷疑產品有故障的情況下,確保對這些零件進行識別、控制和阻止,以供進一步使用。
-變更管理,在新產品或變更產品和工藝的情況下進行驗證。
在工藝流程、檢驗方法、防卡軛和工藝能力方面推動持續改進。
-組織快速響應團隊,對支持區域內的日常質量問題做出反應,確保問題解決的有效性和效率。
-對質量數據進行統計分析,并采取措施提高產品質量。
-在車間準備和控制與質量相關的說明/標準,提供必要的培訓。
任職資格
- Background in Mechanical
or material, full-time bachelor’s degree or above.
- Well known geometric
tolerances, can drawing reading, and skilled in quality tools, eg SPC,MSA,8D
etc.
- At least 3 years of work
experience in the quality field of the automotive industry.
- Strong ability to
withstand pressure, clear logical thinking, proactive, and strong
communication skills.
- English can be used as a
working language.
機械或材料專業背景,本科以上學歷。
熟悉幾何公差,能讀懂圖紙,熟練使用SPC、MSA、8D等質量工具。
至少3年汽車行業質量領域的工作經驗。
抗壓能力強,邏輯思維清晰,積極主動,溝通能力強。
英語可以用作工作語言。